Products

Distilling Information







You are here:Home > Specialty D.I.Y. Copper Components

Custom Copper Moonshine Equipment, Parts & Components

For the DIY – interested in distilling at home, browse our high quality selection of specialty alcohol distillation components. We stock copper flanges plus the larger caps and reducing couplers to allow you to successfully make a still at home. The copper flanges perfectly fit a flat to slightly domed pot lid and the neck will fit tightly with standard copper plumbing tube. Pick the right sizes for your own still construction and enjoy a good start toward enjoying homemade moonshine.

How to Make a Still?

Fabricating your own moonshine still will require significant study and effort, but learning how to make a still is half of the fun of the whole moonshine distilling process. Drinking and enjoying it, of course, is the other half! At Moonshine Still Pro, we’re happy to equip you with the best quality alcohol distillation equipment, all custom designed and made from copper for best distilling results.

We love the information at Home Distiller, you’ll find information there on building everything from the simplest pot still to the most sophisticated reflux designs. There are many other books and DVD’s out there on how to make a still but there is nothing as complete (and FREE) as the Home Distiller site. One thing is certain though, before you can perfect a mash to ferment and then distill, you need to successful build a still. And one bit of advice remains constant: use high quality moonshine equipment to get high quality homemade moonshine. You’ll always get quality DIY pieces online from us at Moonshine Still Pro!

Sort By:
Page of 1
3" Copper Tube Cap
3" Copper Tube Cap
Our Price: $19.50

This is a custom formed column tube cap for do-it-yourself still construction.  Fits snugly on standard 3" (3.125" actual) copper plumbing tube.  You will need to solder on to guarantee a good seal.  Made from heavy .062 thick (14 ga) copper.  This cap is a cost effective alternative to higher priced wrought copper plumbing fitting caps.  It is intended for use in still construction and is not approved for use as a pressure fitting in commercial plumbing systems.
4" Copper Tube Cap
4" Copper Tube Cap
Our Price: $24.50

This is a custom formed column tube cap for do-it-yourself still construction.  Fits snugly on standard 4" (4.125" actual) copper plumbing tube.  You will need to solder on to guarantee a good seal.  Made from heavy .062 thick (14 ga) copper.  This cap is a cost effective alternative to higher priced wrought copper plumbing fitting caps.  It is intended for use in still construction and is not approved for use as a pressure fitting in commercial plumbing systems.
1.5" Copper Tube Mounting Flange
1.5" Tube Column Mounting Flange
Our Price: $31.00

Custom made copper mounting flange for do-it-yourself still construction. Neck fits snugly on standard 1.5" (1.625" actual) copper plumbing tube with no stop so tube can protrude all the way through if you desire. Made from heavy .050 thick (16 ga) copper. Flange is 4-7/8" OD with a 5 degree downward angle so that it works well on a flat to slightly domed pot lid. Drill your own mounting holes or clip with bolts & washers from the edges. Riveting also works well if you do not need to remove. Matching 1/16" thick silicone gasket available in the gasket section.
2" Copper Tube Mounting Flange
2" Tube Column Mounting Flange
Our Price: $36.00

Custom made copper mounting flange for do-it-yourself still construction. Neck fits snugly on standard 2" (2.125" actual) copper plumbing tube with no stop so tube can protrude all the way through if you desire. Made from heavy .050 thick (16 ga) copper. Flange is 4-7/8" OD with a 5 degree downward angle so that it works well on a flat to slightly domed pot lid. Drill your own mounting holes or clip with bolts & washers from the edges. Riveting also works well if you do not need to remove. Matching 1/16" thick silicone gasket is available in the gasket section.
3" x 3/4" Copper Reducing Coupler
3" x 3/4" Copper Reducing Coupler
Our Price: $50.00

This is a custom formed 3 x 3/4 (CxC) copper reducing coupler for transitioning your still column to your condenser in do it yourself still construction.  Large end fits snugly on standard 3" (3.125" actual) copper plumbing tube.  Small end fits tight on standard 3/4" (.875" actual) copper plumbing tube.  Made from heavy .062 thick (14 ga) copper.  A tighter fit than most plumbing fittings but you will still need to solder on to insure a seal.  A cost effective alternative to higher priced wrought copper plumbing fittings this coupler is intended for use in still construction and is not approved for use as a pressure fitting in commercial plumbing systems.
3" Copper Tube Flange
3" Tube Column Mounting Flange
Our Price: $58.50

Custom made copper mounting flange for do-it-yourself still construction.  Neck fits snugly on standard 3" (3.125" actual) copper plumbing tube with no stop so tube can protrude all the way through if you desire.  Made from heavy .062 thick (14 ga) copper.  Flange is 2" all around for a 7-1/8" OD.  Drill your own mounting holes or clip with bolts & washers from the edges.  Riveting also works well if you do not need to remove.  Matching 1/16" thick silicone gasket is available in the gasket section.
4" x 3/4" Copper Reducing Coupler
4" x 3/4" Copper Reducing Coupler
Our Price: $68.00

This is a custom formed 4 x 3/4 (CxC) copper reducing coupler for transitioning your still column to your condenser in do it yourself still construction.  Large end fits snugly on standard 4" (4.125" actual) copper plumbing tube.  Small end fits tight on standard 3/4" (.875" actual) copper plumbing tube.  Made from heavy .062 thick (14 ga) copper.  A tighter fit than most plumbing fittings but you will still need to solder on to insure a seal.  A cost effective alternative to higher priced wrought copper plumbing fittings this coupler is intended for use in still construction and is not approved for use as a pressure fitting in commercial plumbing systems.
4" x 1" Copper Reducing Coupler
4" x 1" Copper Reducing Coupler
Our Price: $68.00

This is a custom formed 4 x 1 (CxC) copper reducing coupler for transitioning your still column to your condenser in do it yourself still construction.  Large end fits on standard 4" (4.125" actual) copper plumbing tube.  Small end fits on standard 1" (1.125" actual) copper plumbing tube.  Made from heavy .062 thick (14 ga) copper. A cost effective alternative to higher priced wrought copper plumbing fittings this coupler is intended for use in still construction and is not approved for use as a pressure fitting in commercial plumbing systems.
4" Copper Tube Mounting Flange
4" Copper Tube Column Mounting Flange
Our Price: $75.00

Custom made copper mounting flange for do-it-yourself still construction.  Neck fits snugly on standard 4" (4.125" actual) copper plumbing tube with no stop so tube can protrude all the way through if you desire.  Made from heavy .062 thick (14 ga) copper.  Flange is 2" all around for a 8-1/8" OD.  Drill your own mounting holes or clip with bolts & washers from the edges.  Riveting also works well if you do not need to remove.  Matching 1/16" thick silicone gasket is available in the gasket section.
Copper Flanged Dome
Flanged Dome
Our Price: $150.00

6 inch tall copper dome with 13-3/8" OD flange on bottom designed for your attachment to a pot lid.  There is a 5-1/4" flat spot on top so that you may attach (bolt or solder) any of our tube flanges (purchase separately, 3" & 4" tube flanges will require their flange OD to be reduced).  A centered 1/4" guide hole is there to make hole saw cutting easier.  A 13-3/8" OD silicone gasket for use with this dome is also available in the gasket section of our site.